SHR-800A Mixer

• Name: High speed mixer
• Quantity: 1 set
• Model: SHR-800A

1) Stirring Tank

• Total volume: 800L, Effective volume 600L, Feeding quantity one time: 220Kg
• Shape: Round pallet bottom
• Inner barrel: SUS304, δ＝10mm, 250＃ polishing
• Outer barrel: Q235-A, δ＝2mm
• Barrel top circle flange: SUS304, δ＝22mm, 250＃ polishing

2) Stirring Wing

• Material: SUS304, 250＃ polishing
• Stirring wing speed: 370/740rpm
• Stirring wing construction: Made from top side wing, middle side wing and bottom side wing. Blade made of SUS304

3) Barrel Cover and Lifting Parts

• Barrel cover material: ZL102, inner surface 200＃ polishing
• Sealing: Cover sealing parts adopt two lines white silica rubber sealing
• Feeding mouth and vent: On the barrel cover equipped with feeding mouth and vent

4) Foundation

• Construction: Fixable stirring tank and motor, also equipped with belt tighten device
• Panel material: Made of Q235-A, δ＝20mm
• Pot bottom material: Made of HT200
• Frame material: Q235-A
• Surface: Was sprayed paint

5) Material Discharging Device

• Material: Made of ZL102, 200＃ polishing
• Construction: Pneumatically open, equipped with observing hole and air blowing hole, valve limit opening and so on
• Discharging cover material: ZL102
• Discharging valve material: SUS304

6) Motor

• Model: YD315L-8/4V1 (AC 380V, 50HZ), AC motor
• Power: 83/110KW
• Rotary speed: 740/1480rpm

7) Bearing Sealing Parts

• Sealing: Oil sealing ＋ labyrinth seal ring
• Oil sealing material: Natural rubber
• Design: Air blows from seal ring to stirring tank. This kind of design stops the material getting into the sealing parts
• Bearing: Adopt NSK

8) Electric Apparatus

• Main apparatus: Adopt Suzhou Siemens, RKC temperature controller (Japan)
• Main motor: Adopt time relay, max time: 15 minutes
• Electric box: Separately made and adopts easy dust-proof device
• Electric control panel: On panel: electric lights, running switch, auto running switch (with time recorder). In panel: residual current operated protective devices, pneumatic switch, relay, fuse terminal, and so on
• Air panel: On panel: Pneumatic valve, terminal table; others: regulator, manual ball valve

9) Safety Device

• Main motor: Equipped touching switch and this kind of design ensures that when the cover closes then the stirring wing can rotate
• Discharging valve: There is a touching switch and this kind of design ensures that when the cover closes then the stirring wing can rotate

10) Other Parts

• Include bearing, belt, feeding hopper and other parts